Connection:
SimuCUBE SC1 - Connect an ethernet cable to the X12 upper or lower location on your SimuCUBE Controller board. When looking at the connectors this would be the Upper/Left RJ45 Input toward the Servo Connections.
PSUSB_28xi - Connect the attached ethernet cable to any of the 4 ports. Use the free iFlag software with the Penguin r/c Extension to set the PSB7w to the proper port on the PSUSB28xi.
NOTE: Sim-Pli.city SM-021 - This adapter may not work with this item due to lack of encoder programming. Please check with Sim-Pli.city for compatibility.
SimuCUBE Software Set-up:
In the SimuCUBE Configuration Tool (version 0.11.1 or Later) enter the Analog and Button setup and select either the "Set X12 Upper for encoder use" OR "Set X12 Lower for encoder use" checkbox depending upon which port you have connected the PSB3e to.
Further Instructions:
More detailed instructions are included in the Instructions for the PSB3e.
Please click here to download.