The MOD_27 is designed to be used with 70mm PCD Wheels. Included are (3) M5.0 x 12 Cap Head screws and (3) M5.0 x 65 Cap Head screws. Depending on your mounting you may a spacer such as the PSW_S to securely mount the wheel. In order to use a wheel with a 50.2mm PCD 3 screw mount wheel you will need to get the PSW_502 adaptor.
Computer Connection:
Connect the USB cord from the wheel to your computer, Windows will automatically install the Wheel as Penguin r/c MOD_27.
Connection to your computer may require a USB Extension Cable. We offer a Dash Mount USB Extension kit for this purpose. (PSUSB_e)
Paddle Adjustments:
To adjust the Paddle Switch mounting width you will need a TORX T-8 driver to remove the 4 screws outer screws on the wheelbox. After you may remove the rear plate being careful of the Paddle connection wires. Once open you can remove the 4 screws holding the Paddle Mounting plate to the mount on the PSMOD_ONE back plate, adjust, and then reinstall.
Please see the PS1000 Instructions to learn about all of the adjustments available using the PS1000 Shift Units.
Please click here to download.
NOTE: DO NOT over tighten the screws for the back plate OR paddle mounting as you may strip the plastic housing. Turn only so that there is a snug resistance and no play.
Further Instructions:
More detailed physical instructions are included in the Instructions for this Wheel.
Please click here to download.